SW-MOTEC side racks - KLR650.NET Forums - Your Kawasaki KLR650 Resource!

Grim · 09-05-2010, 10:31 AM

Anyone have this problem?

Just put on my SW-MOTEC side racks and 45L pantiers along with the 35L top box, everything was empty as I was going to the grocery story, and stopped for gas. I guess when I filled the tank the 'tipping point' was reached and when I replaced the nozzle and turned back around the bike tipped over for a nap.

Bent the backside of the right pantier in some and broke the weld on the front leg of the side rack, the one that bolts into the passenger peg location, at the attachment point.

Now I've got to straighten / pop out the bend in the pantier of get it square again and get the rack rewelded. Luckily I know someone that can alum weld, just a matter of him finding the time to get to it. Think that a shortening of the side stand is also in order as well.

Anyone else heve their bike take a dirt nap, while standing still, and break the weld on their side rack? A little dissapointed that the weld broke so easily.

Bryce · 09-05-2010, 10:45 AM

I've got HT racks on mine but it did the same thing without the damage. The kickstand us too long and puts the bike too upright.

09-05-2010, 10:31 AM	#1
Grim A Regular Super Cool Since: Jun 2010 Locale: El Paso, TX Postings: 33	SW-MOTEC side racks Anyone have this problem? Just put on my SW-MOTEC side racks and 45L pantiers along with the 35L top box, everything was empty as I was going to the grocery story, and stopped for gas. I guess when I filled the tank the 'tipping point' was reached and when I replaced the nozzle and turned back around the bike tipped over for a nap. Bent the backside of the right pantier in some and broke the weld on the front leg of the side rack, the one that bolts into the passenger peg location, at the attachment point. Now I've got to straighten / pop out the bend in the pantier of get it square again and get the rack rewelded. Luckily I know someone that can alum weld, just a matter of him finding the time to get to it. Think that a shortening of the side stand is also in order as well. Anyone else heve their bike take a dirt nap, while standing still, and break the weld on their side rack? A little dissapointed that the weld broke so easily.

09-05-2010, 10:45 AM	#2
Bryce Frozen Dead Guy KLR Enthusiast Super Cool Since: Dec 2005 Locale: Acworth, GA Postings: 828	Re: SW-MOTEC side racks I've got HT racks on mine but it did the same thing without the damage. The kickstand us too long and puts the bike too upright. __________________ "It sure beats working all week, boozing it up in some smoky bar or sitting around watching the world go to Hell in living color and still ending up, just before payday, flat broke as usual. That's only existing, not really living." - Don Marshall, Cycles South, 1971 ---------- '08 KLR650 Blue 21 & '06 Ninja 650R Galaxy Silver

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ortlieb Low Profile Saddlebags & Precision Side Racks (Pix)	einfahrt	KLR650 Main Discussion	6	12-05-2012 01:48 PM
PMR Side Racks Install Experience	zt0117	2008 through 2013 KLR650 Discussion	13	09-04-2011 03:43 PM
WTB: Side racks for soft luggage	rickyp3278	Classifieds	1	05-07-2009 04:39 PM
FS:Ebay side racks for 2008 or newer $85 shipped in US	binarkansas	Classifieds	1	04-18-2009 07:40 PM
FS: Ortlieb Drybag Saddlebags and eBay '08 KLR Side Racks	jibbering_squid	Classifieds	9	03-03-2009 09:07 AM

Sponsored links