|09-06-2017, 04:38 PM||#18|
LEVEL 3 STAFF
Super Cool Since: May 2005
Locale: San Diego
Re: Eagle Mike's and Sams 762 Stroker kit!
A few have asked about stroke to rod length ratio. It's good, no worries, can you say 1.6?
It's a straight bolt in to standard cases. This was my design requirement. No spacer needed. You can still work on the bike as easily as it is when stock. This was a design requirement.
We are running a different carb, that will bolt in when we add a couple of parts I make for it. No frame cutting. This was also a design requirement. We'll have a kit with cables, jetted, ready to go, brand new carb, for about $430 plus shipping. Will also work on stock engine KLR, slightly different jetting.
Right now we are running stock camshafts, but have more ready for testing when the dyno is up and running. I'm hoping to have it running for tech day.
Eagle Mfg & Eng since 1990 - Insist on genuine Eagle parts!
https://eaglemike.com/ for parts.
Cary Aspy -the real klr650 guru. RIP my brother, I miss you.
Don't try to be a great man, just be a man, and let history make it's own decision
Be your own KLR650 GURU!
|762, eagle, kit, mike, sams, stroker|